Enabling Automatic Camera Tracking (Powercam Plus Only) - Polycom VSX Series Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Enabling Automatic Camera Tracking (PowerCam Plus Only)

12
VSX S
ERIES
If you are using a VSX 7000e or VSX 8000 with the Polycom PowerCam™ Plus
camera, you can set the camera to automatically point to the person speaking
or to move to the preset location that is closest to the speaker. Use this
feature only if you expect the meeting participants to sit or remain somewhat
stationary during the meeting.
Automatic camera tracking is disabled when your site is muted and when the people at
the far site are speaking.
To enable automatic camera tracking to the speaker:
1. Press Near or
2. Press Auto until you see "Automatic Camera Tracking."
To enable automatic voice tracking to camera presets:
1. Press Near or
2. Press Auto until you see "Automatic Camera Tracking to Presets."
The near-site camera icon changes to
automatic voice tracking to camera presets is enabled.
To disable automatic voice tracking to camera presets:
Press Auto until you see "Automatic Camera Tracking Off."
You can also turn off automatic tracking by using the remote to pan, tilt,
or zoom the camera.
Far to choose the near-site or far-site camera.
Far to choose the near-site or far-site camera.
WWW
to let you know that
. . /
POLYCOM COM VIDEODOCUMENTATION