Placing And Ending An Audio-Only Call; Controlling What You See; Adjusting A Camera - Polycom V500 System Getting Started Manual

Placing and Ending an Audio-only Call

Placing an Audio-only Call
Ending an Audio-only Call

Controlling What You See

Adjusting a Camera

© Polycom, Inc.
If you have an ISDN line connected to your V500, you can use your system to
make audio-only calls in addition to using your system to place video calls.
To place an audio-only call from your system:
1. On the Place a Call screen, enter the number you want to call.
To place a call within your PBX system, enter the last four digits of the
number.
To delete a digit, press
2. Press Call to place the call.
To hang up from an audio-only call:
>>
Press Hang Up on the remote control.
If the person on the telephone hangs up first, you need to disconnect the call from the
V500 system, just as you would hang up a telephone receiver in a regular phone call.
You can control what you see during a call by moving and focusing your
camera, switching views, and adjusting the PIP.
You can pan and tilt the V500 camera manually, and you can use the focus
wheel to focus the camera.
Delete on the remote control.
C W Y S
ONTROLLING HAT OU EE
7