Controlling What You See; Selecting And Adjusting A Camera Or Other Video Source - Polycom VSX Series Getting Started Manual

G S G
ETTING TARTED UIDE FOR THE

Controlling What You See

Selecting and Adjusting a Camera or Other Video Source

6
VSX S
ERIES
Adjusting your cameras lets you show conference participants what you want
them to see. You can adjust cameras and other video sources before the
meeting starts and while the meeting is in progress.
You can use the remote control to select the main camera or any other
near-site or far-site video sources, such as document cameras, computers,
VCRs, or DVD players.
You can also use the remote control to adjust the main camera on VSX set-top
and component systems. You may be able to adjust other auxiliary cameras or
far-site cameras that support pan, tilt, and zoom movement.
You can adjust the far-site camera only if it is configured to allow you to control it.
To select a near-site or far-site camera or other video source:
1. If you are in a call, press
or far-site control. The icon on the screen indicates which you can
control:
2. Press Camera on the remote control. Then select the camera or
other video source you want to use.
To adjust a camera using the remote control:
1. Press Near or
2. Press the arrow buttons on the remote control to move the camera up,
down, to the left, or to the right.
3. Press Zoom to zoom out or in.
Near or Far to select either near-site
This onscreen icon indicates that you
can control a near-site camera or
video source
This onscreen icon indicates that you
can control a far-site camera or
video source
Far to select either near-site or far-site control.
WWW
. . /
POLYCOM COM VIDEODOCUMENTATION