Controlling What You See; Viewing Your System's Ip Address; Selecting And Adjusting A Camera Or Other Video Source - Polycom RealPresence Group Series User Manual

User's Guide for the Polycom RealPresence Group Series and the Polycom Touch Control

Controlling What You See

Viewing Your System's IP Address

Selecting and Adjusting a Camera or Other Video Source

8
To view your system IP addresses:
1 On the Home screen, touch System.
2 Touch .
IP Address displays the Polycom Touch Control address.
The host system name and IP address are also displayed on this screen.
You can use the Polycom Touch Control to select and adjust the main camera
or other near-end or far-end video sources, such as document cameras or
computers. You may be able to adjust other auxiliary cameras or far-end
cameras that support pan, tilt, and zoom movement.
You can use the Polycom Touch Control to select and adjust the main camera
or other near-end or far-end video sources, such as document cameras or
computers.
When you are in camera control mode, you can press and hold a number to
save a preset. For more information about presets, see
Camera Presets on page 11.
To select a near-end or far-end camera, or other video source:
1 From the Call screen, touch Camera, or from the Home screen touch
Cameras.
2 Touch Select Camera, and then touch the camera or other video source
you want to use.
3 In a call, touch Near or Far to select either near-end or far-end control.
The icon for the video source moves up slightly on the screen, and the
video source is shown to the call participants.
Setting and Using
Polycom, Inc.