Polycom Bluetooth Remote Control - Polycom G7500 Administrator's Manual

Connecting Microphones to the Microphone Adapter
To connect a non-IP Polycom microphone to the microphone adapter, use a RealPresence Group Series
microphone array Walta-Walta cable. You can then daisy chain up to three more microphones to the one
directly connected to the adapter.
For more information, see the Polycom Microphone IP Adapter Setup Sheet.
Move a Microphone Adapter to Another Location
You might need to move your microphone adapter from a G7500 system in one room to a G7500 system
in another room.
Procedure
1. In the system web interface, unpair the microphone adapter from the system.
2. Move the microphone adapter to the new location.
3. Use the system web interface to pair the microphone adapter to the new system.
Related Links
Unpair an IP Peripheral Device

Polycom Bluetooth Remote Control

Your Polycom Bluetooth Remote Control is ready to use with your G7500 system without any extra setup.
Use the system web interface to do the following:
▪ Configure a remote control's button behavior
▪ Pair and unpair a remote control
▪ View the remote control name, pairing status, and battery level
Related Links
Disable Wireless Options
Configure Remote Control Behavior
You can customize how the remote control paired to your G7500 system behaves.
Procedure
1. In the system web interface, go to General Settings > System Settings.
2. Configure the following settings:
Setting
Keypad Audio Confirmation
Numeric Keypad Function while in a Call
Polycom, Inc.
on page 13
on page 40
Description
Specifies whether to play a voice confirmation of
numbers selected with the remote control or
keypad.
Specifies whether pressing number buttons on the
remote control or keypad moves the camera to
presets or generates touch tones (DTMF tones). If
you set this option to Presets, you can generate
DTMF tones by pressing the # key on the remote
control while in a call.
Setting Up the System
18