Setting And Using Presets With The Remote Control Or Keypad; Setting And Using Presets With The Polycom Touch Control - Polycom HDX 4000 Series Administrator's Manual

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
If a Polycom Touch Control is paired with a Polycom HDX system, you must
use the Polycom Touch Control to create presets. Refer to
Presets with the Polycom Touch Control
If you use a Polycom EagleEye Director with your HDX system, you cannot use
presets for voice tracking.

Setting and Using Presets with the Remote Control or Keypad

To store a preset using the remote control:
If you are in a call, press Near or Far then choose a near-site or far-site
1
camera or other video source.
If you selected a camera that supports electronic pan, tilt, and zoom, you
2
can adjust the camera's position:
— Press Zoom to zoom the camera out or in.
— Press the arrow buttons on the remote control to move the camera up,
down, left, or right.
Press and hold a number to store the preset position.
3
To store a double-digit preset (10-99), hold the second number down.
Any existing preset stored at the number you enter is replaced.
To delete all presets on a Polycom HDX 9000 series, Polycom HDX 8000 series,
Polycom HDX 7000 series, or a Polycom HDX 6000 series system:
If a call is connected, press Near to choose a near-site video source.
1
Press Preset on the remote control.
2
Press and hold
3
To delete all presets on a Polycom HDX 4000 series:
Press Near on the keypad.
1
Press and hold
2

Setting and Using Presets with the Polycom Touch Control

To move the camera to a stored preset:
From the Home screen or Call screen, touch Cameras.
1
on page 3-37.
Delete to delete all presets.
Delete to delete all presets.
Monitors and Cameras
Setting and Using
3–37