Using A Polycom Realpresence Group Series Remote Control; Remote Control Buttons And Descriptions - Polycom RealPresence Group Series Documentation

Using a Polycom RealPresence Group
Series Remote Control
The infrared RealPresence Group Series remote control enables you to operate a RealPresence
Group Series system. This includes placing calls, adjusting the volume, controlling the camera,
navigating screens, and more. RealPresence Group Series systems and Polycom® EagleEye™
cameras and camera systems have infrared receivers that enable you to control the system by pointing
the remote control toward the system or a connected EagleEye camera or camera system.
Note If you have an SDI camera, you might need a special cable to connect the camera to the
system to receive infrared signals from the remote control. For more information about
the cable, contact Polycom support.

Remote Control Buttons and Descriptions

The following table shows the parts of the remote control and includes descriptions for each part.
Remote Control Button Descriptions
Number Description
1 LED IR emitter
2 Decrease speaker volume.
3 Increase speaker volume.
4 Zoom camera out.
5 Zoom camera in.
Printed from Polycom, Inc. (http://documents.polycom.com)
Parts of the Remote Control
Page 10