System Configuration And Programming; Installation; License Activation; Creation Of New Project And User Management - ABB AC500-S Safety User Manual

Configuration and programming
System configuration and programming > Creation of new project and user management

4.3 System configuration and programming

In this chapter, we provide a step-by-step explanation on how to configure and program
AC500-S safety PLC.

4.3.1 Installation

4.3.2 License activation

Automation 1.
Builder 2.0.2 (or
higher)
2.
Automation 1.
Builder up to
2.
1.2.4

4.3.3 Creation of new project and user management

Create a new project and configure user management to permit access to safety modules and
their configuration to safety personnel only.
1.
2.
3.
Only members of safety group are allowed to modify safety modules, change their configuration,
etc. By default, no users without proper log-in and access rights can access safety modules.
Project administrator is allowed to use all available user management features to find the best
suitable user setup with appropriate rights
130
Install Automation Builder, as described in its installation guide.
Order DM220-FSE or DM221-FSE-NW add-on with part numbers 1SAS010020R0102 and
1SAS010021R0102.
Activate license on your PC following license activation instructions.
Order PS501-S license with part number 1SAP198000R0001.
Activate license on your PC following license activation instructions.
Use "New project..." menu item in Automation Builder to create a new project.
Select a non-safety AC500 CPU in the menu. Make sure that you select the right ones
supporting safety CPUs
Ä Appendix C.1 "Compatibility with AC500 V3" on page 384.
NOTICE!
Pay attention to non-safety CPU settings
parameters configuration" on page 375
eters configuration" on page 390.
To create new users and maintain existing ones, go to "Project è Project Settings...".
NOTICE!
In all newly created Automation Builder projects, there is a default user
"Owner" with an empty password. This is a project administrator. The
project administrator is responsible to create a new password for user
"Owner" and, in addition, create dedicated safety and non-safety users
based on your project organization demands.
3ADR025091M0208, 12, en_US
Ä Appendix B.1 "Compatibility with AC500 V2" on page 366
Ä [4].
Ä Appendix B.3 "V2 CPU
Ä Appendix C.3 "V3 CPU param-
2020/06/19