ABB AC500-S Safety User Manual page 368

Usage of safety CPU with V2 non-safety CPU PM5xx
B.2.1 Error messages for safety CPUs
The errors are shown as they are displayed in Automation Builder.
Table 104: Common error messages for SM560-S / SM560-S-FD-1 / SM560-S-FD-4 safety CPUs
Error Compo- Device
severity nent or
interface
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
E2 1 ... 4 255
368
Module Channel Error
30 1 0
30 1 1
30 1 2
30 1 12
30 1 18
30 1 28
30 1 40
30 1 43
30 1 48
30 1 52
30 2 0
30 2 1
30 2 2
30 2 3
3ADR025091M0208, 12, en_US
Error text Remedy
Operation fin- Change safety PLC switch
ished. address setting or remove
SD-card from non-safety
PLC.
Restart safety PLC. If this
error persists, replace safety
PLC.
Wrong user Delete user data from safety
data PLC. Restart safety PLC and
write user data again.
Internal Restart safety PLC. If this
PROFIsafe initi- error persists, replace safety
alization error PLC. Contact ABB technical
support.
Flash read error Restart safety PLC. If this
error persists, replace safety
PLC. Contact ABB technical
support.
Internal error Contact ABB technical sup-
port. Replace safety PLC.
Boot project Reload boot project. If this
download error error persists, replace safety
PLC.
Wrong firmware Update safety PLC firmware.
version Restart safety PLC. If this
error persists, replace safety
PLC.
Internal error Contact ABB technical sup-
port. Replace safety PLC.
Overvoltage or Restart safety PLC. Check
undervoltage safety PLC setting for power
detected supply error. If this error per-
sists, replace safety PLC.
Internal error Contact ABB technical sup-
port. Replace safety PLC.
User program Check user program
triggered safe
stop
Internal error Contact ABB technical sup-
port. Replace safety PLC.
Internal Restart safety PLC. If this
PROFIsafe error error persists, replace safety
PLC. Contact ABB technical
support.
Internal error Contact ABB technical sup-
port. Replace safety PLC.
2020/06/19