Mounting, Dimensions And Electrical Connection - ABB AC500-S Safety User Manual
Hide thumbs
Also See for AC500-S:
- Safety user manual (452 pages) ,
- Application note (24 pages) ,
- System manual (119 pages)
Table of Contents
Advertisement
AC500-S safety modules
TU582-S safety I/O terminal unit > Mounting, dimensions and electrical connection
3.6.2 Mounting, dimensions and electrical connection
The safety I/O modules can be plugged only on spring-type TU582-S I/O terminal unit. The
unique mechanical coding on I/O terminal units prevents a potential mistake of placing the non-
safety I/O module on safety I/O terminal unit and the other way around. Basic information on
system assembly is shown here. Detailed information can be found in
Installation and maintenance have to be performed according to the technical rules, codes and
relevant standards, e.g. EN 60204 part 1, by skilled electricians only.
Assembly of
TU582-S on DIN
rail
Fig. 61: Assembly instruction for mounting on a DIN rail
Assembly of
TU582-S with
screws
The insertion of the accessories TA526 for wall mounting is essential.
1.
124
Put the terminal unit on the DIN rail above and then snap-in below.
Snap TA526 on the rear side of the terminal unit like DIN rails.
3ADR025091M0208, 12, en_US
TA526
TA526
Ä [4].
1.0
2.0
3.0
4.0
1.1
2.1
3.1
4.1
1.2
2.2
3.2
4.2
1.3
2.3
3.3
4.3
1.4
2.4
3.4
4.4
1.5
2.5
3.5
4.5
1.6
2.6
3.6
4.6
1.7
2.7
3.7
4.7
1.8
2.8
3.8
4.8
1.9
2.9
3.9
4.9
2020/06/19
Advertisement
Table of Contents
