ABB AC500-S Safety User Manual page 170
Hide thumbs
Also See for AC500-S:
- Safety user manual (452 pages) ,
- Application note (24 pages) ,
- System manual (119 pages)
Table of Contents
Advertisement
Configuration and programming
System configuration and programming > Checking of program and system configuration
Fig. 85: Example of an SVT checklist with errors. When there are errors in the automatic consis-
tency checks, the contents of the project information section of the SVT checklist is slightly dif-
ferent.
1
List of errors encountered by the automatic consistency checks done by SVT
2
List of remedies suggested by SVT to correct the causes of errors
3
No data checksum is given for the SVT checklist when there are errors
4
List of the safety devices indicates which safety devices have generated errors
In addition to the project information section, each safety device section with errors has a corre-
sponding message.
170
NOTICE!
If you cannot remedy all of encountered errors with the suggested remedies or
otherwise, contact ABB technical support for assistance.
3ADR025091M0208, 12, en_US
2020/06/19
Advertisement
Table of Contents
