ABB AC500-S Safety User Manual page 367

B.2 Error messages with AC500 V2 non-safety CPU
Using CM589-PNIO or CM589-PNIO-4 IO device communication modules, one can also gen-
erate PROFINET diagnostic messages for F-Devices of SM560-S-FD-1 and
SM560-S-FD-4
safety CPUs " on page 371
channel errors" on page 372.
2020/06/19
NOTICE!
The error messages of the safety CPU are aggregated in the diagnosis stack on
non-safety CPU.
You can use diagreset, diagack all, diagack x, diagshow all and
diagshow x commands in non-safety CODESYS PLC browser to list and
process various error messages in AC500 system, including those in the safety
CPU. More details on these commands can be found in
Ä Table 105 "Specific error messages for SM560-S-FD-1 / SM560-S-FD-4
Ä Table 106 "Mapping of AC500/AC500-S errors to PROFINET
3ADR025091M0208, 12, en_US
Usage of safety CPU with V2 non-safety CPU PM5xx
Ä [4].
367