ABB AC500-S Safety User Manual page 145

4.
Fig. 72: F-Parameter values in CODESYS Safety
2020/06/19
Check your F-Device configuration in CODESYS Safety.
If your configuration of F-Devices is final, you have to check that F-Parameter values from
F-Parameter tab are the same as those imported to CODESYS Safety: Go to
"Resources" tab in CODESYS Safety project. Navigate to "Global Variables
è PROFIsafe" and select the F-Device instance you want to check.
DANGER!
You have to formally confirm that F-Parameter values from F-Parameter
tab are the same as those imported to CODESYS Safety (item 3 in
Ä Chapter 6.2 "Checklist for creation of safety application program"
on page 326).
3ADR025091M0208, 12, en_US
System configuration and programming > Programming of AC500-S safety CPU
Configuration and programming
145