ABB AC500-S Safety User Manual page 171
Hide thumbs
Also See for AC500-S:
- Safety user manual (452 pages) ,
- Application note (24 pages) ,
- System manual (119 pages)
Table of Contents
Advertisement
Fig. 86: Example of a safety device section with errors. When there are errors in the automatic
checks for a safety device, the contents of the safety device section of the SVT checklist is
slightly different.
1
List of errors for this safety device with exemplary error codes
2
No data checksum is given for the safety device when there are errors
3
Device identification information to help in troubleshooting the issue
Summary of
Possible errors generated by SVT:
error messages
●
General errors:
–
–
–
●
Errors related to safety devices:
–
–
–
–
–
–
–
–
●
Errors related to F-Parameters or channel mapping:
–
–
Possible remedies suggested by SVT to correct errors:
●
Reinstall the GSDML file of safety device N. 'XYZ' and update this device in Automation
Builder.
●
Use either the parent element or sub-elements in the safety device N. 'XYZ'
●
Repeat the "Create Safety Configuration Data" command for your CODESYS Safety project
in Automation Builder.
●
Delete or disconnect F-Devices in order not to exceed the maximum number of 32.
2020/06/19
System configuration and programming > Checking of program and system configuration
Internal error in the safety device N. 'XYZ'. For error codes, refer to the section for this
safety device.
Internal error in CODESYS Safety project. Error code x.
Maximum number of 32 connected F-Devices has been exceeded.
Internal error in the safety device. For error codes, refer to the section for this safety
device.
Internal error in the safety device. Error code x.
Internal error in the safety device or GSDML file. For error codes, refer to the section for
this safety device.
Internal error in the safety device or GSDML file. Error code x.
Internal error in F-Parameters. For error codes, refer to the section for this safety device.
Internal error in F-Parameters. Error code x.
Error in the GSDML file. Error code x.
Missing GSDML file.
Internal error. Error code x.
Multiple mappings to an output are not permitted. Use either the parent element or sub-
elements.
3ADR025091M0208, 12, en_US
Configuration and programming
171
Advertisement
Table of Contents
