ABB AC500-S Safety User Manual page 286

Configuration and programming
AC500-S libraries > SafetyBlocks_PLCopen_AC500_v22.lib
Function block- Table 67: FB-specific error codes
specific error
DiagCode
and status
codes C001
C002
C010
C111
C211
Table 68: FB-specific status codes (no error):
DiagCode
0000
8001
8002
286
State name State description and output setting
Reset Error Static Reset signal in state 8001.
1
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
Reset Error Static Reset signal in state 8003.
2
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
Control Error Static signal at ProcessControl in state 8010.
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
Init Error Simultaneous rising trigger at Reset and ProcessControl in state
8001.
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
Lock Error Simultaneous rising trigger at Reset and ProcessControl in state
8003.
Ready = TRUE
S_OutControl = FALSE
Error = TRUE
State name State description and output setting
Idle The function block is not active (initial state).
Ready = FALSE
S_OutControl = FALSE
Error = FALSE
Init Block activation startup inhibit is active. Reset required.
Ready = TRUE
S_OutControl = FALSE
Error = FALSE
Safe Triggered safety function.
Ready = TRUE
S_OutControl = FALSE
Error = FALSE
3ADR025091M0208, 12, en_US 2020/06/19