ABB AC500-S Safety User Manual page 167

1.
2.
3.
4.
If the result of your verification for at least one of manual checks in the SVT checklist is negative
or not acceptable, make sure that safety configuration data is up-to-date. If the problems per-
sist, contact ABB technical support for assistance.
Each section of the SVT checklist starts with a heading. The end of the SVT checklist is indi-
cated with the text string:
How to verify This section has general information on the SVT checklist. It begins with the time stamp and the
the project version of SVT. Example of a project information section: Fig. 79 on page 161.
information sec-
tion
1.
2.
3.
2020/06/19
System configuration and programming > Checking of program and system configuration
Verify the project information section
on page 167.
Verify each safety device section
on page 168.
Verify the libraries section
Verify the end of the SVT checklist
on page 169.
Verify that the automatic checks done by SVT have passed:
ð If the automatic checks generate errors, you get an error message
automatic checks" on page 169:
Verify that the CODESYS Safety project information is correct. Mark a positive verification
of an item with an "X" in the SVT checklist:
ð
NOTICE!
Mark the corresponding checkbox for each question in the SVT check-
list as in the example above. You can mark the verified items into a
printout or into the text file.
Read the data checksum for the whole SVT checklist.
Use this data checksum to verify changes to the entire SVT checklist.
If you run SVT for the first time, do the following checks.
Otherwise, check if the data checksum is identical to the previous validated SVT checklist.
If these SVT data checksums are identical, you do not need to do the manual checks. If
the data checksums are not identical, continue with the manual checks in the SVT check-
list.
3ADR025091M0208, 12, en_US
Ä "How to verify the project information section"
Ä "How to verify the safety device sections"
Ä "How to verify the libraries section" on page 169.
Ä "How to verify the end of the SVT checklist"
Configuration and programming
Ä "Errors in the
167