ABB AC500-S Safety User Manual page 373

B.2.2 Error messages for safety I/O modules
Table 107: Error messages for safety I/O modules (channel or module reintegration is possible)
Error Compo- Device
severity nent or
interface
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
E3 14 1..10
2020/06/19
Module Channel Error
0 0..15 3
0 0..15 12
0 0..15 13
0 0..15 25
0 0..15 28
1 0..3 4
1 0..3 7
1 0..3 55
2 0..7 13
2 0..7 18
31 31 10
31 31 11
31 31 20
31 31 25
31 31 43
3ADR025091M0208, 12, en_US
Usage of safety CPU with V2 non-safety CPU PM5xx
Error text Remedy
Discrepancy Check discrepancy time
time expired value, channel wiring and
sensor.
Test pulse error Check wiring and sensor.
Channel test Check wiring and sensor. If
pulse cross-talk this error persists, replace I/O
error module. Contact ABB tech-
nical support.
Channel stuck- Check I/O module wiring.
at error Restart I/O module, if needed.
If this error persists, replace
I/O module.
Channel cross- Check I/O module wiring.
talk error Restart I/O module, if needed.
If this error persists, replace
I/O module.
Measurement Check channel wiring and
overflow at the sensor power supply.
I/O module
Measurement Check channel wiring and
underflow at the sensor power supply.
I/O module
Channel value Adjust tolerance window for
difference too channels. Check channel
high wiring and sensor configura-
tion.
Channel read- Check I/O module wiring.
back error Restart I/O module, if needed.
If this error persists, replace
I/O module.
Channel cross- Check I/O module wiring.
talk error Restart I/O module, if needed.
If this error persists, replace
I/O module.
Process voltage Check process voltage
too high
Process voltage Check process voltage
too low
PROFIsafe Restart I/O module. If this
communication error persists, contact ABB
error technical support.
PROFIsafe Restart I/O module. If this
watchdog timed error persists, increase
out PROFIsafe watchdog time.
Internal error in Replace I/O module
the device
373