ABB AC500-S Safety User Manual page 316

Configuration and programming
AC500-S libraries > SafetyExt_AC500_V22.lib
Name Data type
ERR BOOL
ERNO WORD
Call in ST
PM5xxSend (EN := PM5xxSend_EN,
DATA := ADR(PM5xxSend_DATA),
DATA_LEN := PM5xxSend_DATA_LEN,
DONE => PM5xxSend_DONE,
ERR => PM5xxSend_ERR,
ERNO => PM5xxSend_ERNO);
316
Initial value Description, parameter values
FALSE Output ERR indicates whether an error occurred
during sending. This output always has to be consid-
ered together with output DONE. The following
applies if an error occurred during sending: DONE =
TRUE and ERR = TRUE. Output ERNO indicates the
error number.
16#0000 Error number
Output ERNO provides an error identifier if an invalid
value has been applied to an input or if an error
occurred during job processing. ERNO always has to
be considered together with the outputs DONE and
ERR. The output value at ERNO is only valid if
DONE = TRUE and ERR = TRUE.
3ADR025091M0208, 12, en_US
Ä [4].
2020/06/19