ABB AC500-S Safety User Manual page 223

DiagCode
8003
8012
8004
8014
8005
4.6.4.8 SF_TwoHandControlTypeII
Standards Requirements
EN 574:1996 Clause 4, Table 1, Type II.
5.1 Use of both hands / simultaneous actuation.
5.2 Relationship between output signal and input signals.
5.3 Completion of the output signal.
5.6 Reinitiation of the output signal.
6.3 Use of DIN EN 954-1 category 3 (can only be realized by NO and NC switches together
with antivalent processing)
ISO 12100-2:2003 4.11.4: Restart following power failure/spontaneous restart
2020/06/19
State name State description and output setting
Wait for Waiting for rising trigger at Reset.
Reset
Ready = TRUE
S_GuardMonitoring = FALSE
Error = FALSE
Guard Guard completely opened.
Opened
Ready = TRUE
S_GuardMonitoring = FALSE
Error = FALSE
Wait for S_GuardSwitch1 has been switched to TRUE - waiting for
Guard- S_GuardSwitch2; discrepancy timer started.
Switch2
Ready = TRUE
S_GuardMonitoring = FALSE
Error = FALSE
Wait for S_GuardSwitch2 has been switched to TRUE - waiting for
Guard- S_GuardSwitch1; discrepancy timer started.
Switch1
Ready = TRUE
S_GuardMonitoring = FALSE
Error = FALSE
Guard Guard closed. Waiting for Reset, if S_AutoReset = FALSE.
Closed
Ready = TRUE
S_GuardMonitoring = FALSE
Error = FALSE
3ADR025091M0208, 12, en_US
Configuration and programming
AC500-S libraries > SafetyBlocks_PLCopen_AC500_v22.lib
223