Wiring - INVT Goodrive350 Series Operation Manual

Goodrive350 series high-performance multifunction VFD
Unscrew the screws,
take out the keypad,
and remove the upper cover
Tighten the screws
Diagram of outlet box cut
A.3 Wiring
1. Ground a shielded cable as follows:
STEP 1
STEP 3
Align the EC positioning holes
and positioning studs to fix the EC
STEP 5
查看细节
STEP 7
Figure A-3 Expansion card installation process diagram
Unscrew the screws and remove th e lower cover
Scale 4:1
Cut the corresponding outlet box
Diagram of installation wiring
Wire binding position
-339-
Expansion cards
STEP 2
Insert the EC
STEP 4
STEP 6
STEP 8