Keypad Display; Displaying Stopped-State Parameters - INVT Goodrive350 Series Operation Manual

Goodrive350 series high-performance multifunction VFD
Area Name
Real-time display
Header A
VFD running state
Header B
display area
VFD model display
Header C
Parameter names
and function codes
Display D
on the VFD
homepage
Values of parameters
Display E on the VFD
homepage
Corresponding
Footer F menus of function
keys (4), (5) and (6)

5.3 Keypad display

The VFD keypad can display the stopped-state parameters, running-state parameters, function
parameter editing status, and fault alarm status.

5.3.1 Displaying stopped-state parameters

When the VFD is in stopped state, the keypad displays stopped-state parameters, and this interface
A
16:02:35
Fwd
Set Freq
P17.00 Hz
DC Bus Volt
D
P17.11 V
HDIB/A/S4/3/2/1
P17.12
Parameter
Figure 5-2 Main interface of LCD
Display the real-time; clock battery is not included; the time
area needs to be reset when powering on the VFD
Display the running state of the VFD:
1.
during operation; Rev – Run reversely during operation;
"Disrev" – Reverse running is forbidden;
2.
Keypad; "Trml" – Terminal; "Remote" - Communication
3.
The VFD is in stop state (no fault); "Run" – The VFD is in
running state; "Jog" – The VFD is in jogging state; "Pre-alarm"
– the VFD is under pre-alarm state during running; "Fault" –
VFD fault occurred.
VFD model display: "GD350" – current VFD is GD350 series
area VFD
Display a maximum of three parameter names and function
codes on the homepage. The parameters diplayed on the
homepage can be managed.
Display the values of parameters on the VFD homepage,
which are updated in real time.
Indicate the menus corresponding to function keys (4), (5)
and (6). The corresponding menus of function keys (4), (5)
and (6) vary with interfaces, and the content displayed in this
area varies also.
B
Local Ready GD350
50.00
540.0
000000
About
F
Display motor rotating direction: "Fwd" – Run forward
Display VFD running command channel: "Local" –
Display current running state of the VFD : "Ready" –
-37-
Basic operation guidelines
C
E
Menu
Used to