INVT Goodrive350 Series Operation Manual page 116

Goodrive350 series high-performance multifunction VFD
Set
value
53 Roll diameter setting reached
54 Max. roll diameter reached
55 Min. roll diameter reached
56 Fire control mode enabled
57–63
Related parameter list:
Function
code
P06.00 HDO output type
P06.01 Y1 output selection
P06.02 HDO output selection
Relay RO1 output
P06.03
Relay RO2 output
P06.04
Function
control
Reserved
Name
0: Open collector high-speed pulse output
1: Open collector output
0: Invalid
1: In running
2: In forward running
3: In reverse running
selection
4: In jogging
5: VFD fault
6: Frequency level detection FDT1
7: Frequency level detection FDT2
8: Frequency reached
9: Running in zero speed
10: Reach upper limit frequency
11: Reach lower limit frequency
12: Ready to run
13: In pre-exciting
14: Overload pre-alarm
selection
15: Underload pre-alarm
16: Simple PLC stage completed
17: Simple PLC cycle completed
18: Reach set counting value
19: Reach designated counting value
20: External fault is valid
21: Reserved
22: Reach running time
23: Virtual terminal output of
Description
detection is enabled in tension control.
The set roll diameter is reached during running in
tension control.
The max. roll diameter is reached during running
in tension control.
The min. roll diameter is reached during running in
tension control.
The fire mode is turned on.
Description
-107-
Basic operation guidelines
Default
value
0
0
0
1
5