Editing A Parameter List - INVT Goodrive350 Series Operation Manual

Goodrive350 series high-performance multifunction VFD

5.4.2 Editing a parameter list

The parameters in the parameter list in stopped state can be added as needed (through the menu of
user defined home parameters), and the list can also be edited such as "Move up", "Move down",
"Delete from the list", and "Restore default". The edit function is shown in the following.
16:02:35 Fwd
Local Ready
Stopped-state parameters
Running-state parameters
Back Home
Press key to enter edit interface, select the operation needed, and press the
key or key to confirm the edit operation and return to the previous menu (parameter list), the
returned list is the list edited. If the
selectingan edit operation, it will return to the previous menu (parameter list remain unchanged).
Note: For the parameter objects in the list header, move-up operation will be invalid, and the same
principle can be applied to the parameter objects in the list footer; after deleting a certain parameter,
the parameter objects under it will be moved up automatically.
The items in the parameter list in running state can be added as needed (through the menu of user
defined home parameters), and the list can also be edited such as "Place top", "Move up", "Move
down", "Delete from the list", and "Restore default parameters". The edit function is shown in the
interface below.
16:02:35
Fwd Local Ready
Stopped-state parameters
Running-state parameters
Back Home
The parameters of user defined parameter setting can be added, deleted or adjusted as needed,
such as "Place top", "Move up", "Move down", "Delete from the list", and "Restore default parameters";
the adding function can be set in a certain function code in a function group. The edit function is
shown in the figure below.
16:02:35 Fwd
Local Ready
Grouping parameters
User defined parameter setting
State parameter
Motor parameter autotuning
Parameter copy/Restore default
System setting
Back Home
GD350 16:02:35
P17.00：Set Freq
P17.11：DC Bus Volt
P17.12：HDIB/A/S4/3/2/1
P17.13：RO2/RO1/HDO/Y1
P17.26：Current Oper Time
P17.15：Motor Trq Ref
Sele Back
Figure 5-10 List edit diagram 1
16:02:35
GD350
P17.01：OutpFreq
P17.00：Set Freq
P17.11：DC Bus Volt
P17.03：Outp Volt
P17.04：Outp Cur
P17.05：Motor Speed
Sele
Back
Figure 5-11 List edit diagram 2
GD350 16:02:35
P00.00: Speed Ctrl Run Cmd
P00.01: Run Cmd Channel
P00.02: Comm Cmd Channel
P00.03: Max Output Freq
P00.04: RunFreq Up Limit
P00.05: RunFreq Low Limit
Sele Back
Figure 5-12 List edit diagram 3
GD350
Fwd Local Ready
Edit OK
key or key is pressed in edit interface without
Fwd Local Ready GD350
Edit OK
Fwd Local Ready GD350
Edit Sele
-44-
Basic operation guidelines
16:02:35
Fwd Local Ready GD350
Place top
Move up
Move down
Delete from the list
Restore default
Back Home Sele
key,
16:02:35
Fwd Local Ready GD350
Place top
Move up
Move down
Delete from the list
Restore default parameters
Back Home Sele
16:02:35 Fwd Local Ready GD350
Place top
Move up
Move down
Delete from the list
Restore default parameters
Back Home Sele