New Holland WorkMaster 50 Service Manual page 40

Engine flywheel - Remove
WARNING
Avoid injury!
Handle all parts carefully. Do not place your hands or fingers between parts. Use Personal Protec-
tive Equipment (PPE) as indicated in this manual, including protective goggles, gloves, and safety
footwear.
Failure to comply could result in death or serious injury.
It is necessary to split the tractor between engine and
transmission housing to gain access to the clutch. See
engine removal section.
1. Remove the bolts (1). Separate the transmission hous-
ing from engine.
2. Remove the bolts (1) which retains the clutch assembly
to the engine fly wheel and slacken the two remaining
bolts.
3. Insert centralizing pin special tool number 380000612
in clutch plate shaft seats back off the two remain-
ing bolts and remove assembly completely. Retrieve
Power Take-Off (PTO) clutch disc.
4. Remove the bolts (1) and retrieve the pilot bearing as-
sembly.
Engine - Crankshaft and flywheel
47866583_ 02/12/2015
10.2 [10.103] / 3
W0208A
1
GNIL14TR00753AA
2
GNIL14TR00754AA
3
GNIL14TR00769AA