New Holland WorkMaster 50 Service Manual page 35

51. Loosen the clamp (1) on the air inlet hose.
52. Loosen the bolt (2) and remove the air cleaner assem-
bly.
53. Loosen the bolts and remove the air cleaner mounting
bracket.
54. Support the front axle at the front bracket.
55. Support the engine using a suitable hoist.
56. Remove the buckle up bolts and set screws between
the engine and front axle support. Carefully lift the
engine from the front axle support.
57. Make sure that all the wires and tubes are discon-
nected. Place the engine on a suitable stand for re-
pair.
Engine - Engine and crankcase
47866583_ 02/12/2015
10.1 [10.001] / 14
41
GNIL14TR00720AA
42
GNIL14TR00860AA
43
GNIL14TR00755AA