Removing The Propeller Shaft Housing Assembly; Disassembling The Propeller Shaft Assembly; Disassembling The Propeller Shaft Housing Assembly; Checking The Propeller Shaft - SELVA MARINE Kingfish 25 Service Manual

LOWR
Removing the propeller shaft
housing assembly
1. Remove the propeller shaft housing
assembly 1.
1
TIP:
• Insert flat-head screwdrivers between the
propeller shaft housing assembly 1 and
the lower case to remove the propeller
shaft housing assembly.
• If the propeller shaft housing assembly 1 is
stuck to the lower case, use the special ser-
vice tools. See "Measuring the forward and
reverse gear backlash before disassembly"
(8-55).
Disassembling the propeller shaft
assembly
See "Disassembling the propeller shaft
assembly" (8-8).
Disassembling the propeller shaft
housing assembly
1. Remove the reverse gear 1 and reverse
gear shims 2.
4
8-39
Lower unit
3
1
5
5
6
2
1
Stopper guide plate 3: 90890-06501
Bearing separator 4: 90890-06534
Bearing puller assembly 5: 90890-06535
Stopper guide stand 6: 90890-06538
2. Remove the ball bearing 7.
Stopper guide plate 4: 90890-06501
Bearing puller assembly 5: 90890-06535
Stopper guide stand 6: 90890-06538
3. Remove the oil seals 8 with the needle
bearing 9.
A
0
9
8
4
Needle bearing attachment 0:
90890-06614
Driver rod L3 A: 90890-06652

Checking the propeller shaft

See "Checking the propeller shaft" (8-9).
4
7 5
5
6
0
9