SELVA MARINE Kingfish 25 Service Manual page 347

BRKT
4. Tighten the self-locking nut A to the
specified torque, and then install the
caps B.
A A
B
8
A
A A
7
Self-locking nut A:
45 N·m (4.5 kgf·m, 33.2 ft·lb)
5. Connect the ground leads C, D, and E,
and then tighten the grease nipples F to
the specified torque.
6. Install the stoppers G, and then tighten
the nuts H to the specified torque.
H
F
F
G
C
D
Grease nipple F:
3 N·m (0.3 kgf·m, 2.2 ft·lb)
Stopper nut H:
36 N·m (3.6 kgf·m, 26.6 ft·lb)
9-57
Bracket unit
6
A A
7
9
0
H
E
F
7. Inject grease into the grease nipples on
the swivel bracket. See "Lubricating the
outboard motor" (10-14).
B