SELVA MARINE Kingfish 25 Service Manual page 308

4
LT LT
572
3
Upper mount bolt 4:
26 N·m (2.6 kgf·m, 19.2 ft·lb)
3. Install the rubber washers 5, washers
6, and bolts 7 to the lower mounts 8,
and then install the lower mount assem-
blies.
4. Install lower mount housing 1 9, and
then tighten the nuts 0 to the specified
torque.
5. Install the caps A and lower mount cov-
ers B.
5
8
B
9
0
Lower mounting nut 0:
54 N·m (5.4 kgf·m, 39.8 ft·lb)
6. Install the upper case assembly C to the
bracket assembly D.
Upper case and mounts (S-transom, for Europe)
2
2
A A
1
A
7
6
A A
1322
LT LT
572
7. Install the washers E, and then tighten
the self-locking nuts F to the specified
torque.
8. Install lower mount housing 2 G, and
then tighten the bolts H to the specified
torques in 2 stages in the order 1, 2,
and so on.
E
LT
F
E
271
D
G
H
H
1401
!
H
#
Self-locking nut G:
24 N·m (2.4 kgf·m, 17.7 ft·lb)
Lower mount housing bolt I:
1st: 14 N·m (1.4 kgf·m, 10.3 ft·lb)
2nd: 24 N·m (2.4 kgf·m, 17.7 ft·lb)
9. Connect the ground lead.
C
$
H
±
9-18
9