Drive Shaft And Lower Case (High Thrust Model); Removing The Oil Seal Housing, Drive Shaft, And Shift Rod; Disassembling The Oil Seal Housing; Disassembling The Drive Shaft - SELVA MARINE Kingfish 25 Service Manual

Removing the oil seal housing, drive
shaft, and shift rod
1. Remove the cover 1, oil seal housing
assembly 2, and washer 3.
2. Remove the O-ring 4, plate 5, O-ring
6, washer 7, and shift rod 8.
4
5
6
7
8
3. Loosen the nut, and then remove the
drive shaft assembly 9 and pinion 0.
0
Drive shaft holder 3 A: 90890-06517
4. Remove the forward gear assembly.

Disassembling the oil seal housing

1. Remove the oil seals 1 and O-ring 2.
1
2
3
A
9

Drive shaft and lower case (high thrust model)

2
1

Disassembling the drive shaft

1. Remove the taper roller bearing 1.
NOTICE: Do not press the drive shaft
threads a directly.
1
2
2
Bearing inner race attachment 2:
90890-06641

Disassembling the forward gear

1. Remove the taper roller bearing 1.
4
2
Bearing separator 2: 90890-06534
Needle bearing attachment 3:
90890-06612
Driver rod L3 4: 90890-06652
a
1
3
3
2
1
1
8-44
8