SELVA MARINE Kingfish 25 Service Manual page 228

1
a
Needle bearing attachment 2:
90890-06615
Driver rod L3 3: 90890-06652
Depth a: 31.0–31.5 mm (1.220–1.240 in)
TIP:
Face the identification mark b on the needle
bearing toward the reverse gear side.
2. Install new oil seals 4 to the specified
depth c.
A A
4
Driver rod L3 3: 90890-06652
Needle bearing attachment 5:
90890-06611
Depth c: 6.0–6.5 mm (0.236–0.256 in)
TIP:
3
Install an oil seal halfway into the propeller
shaft housing, and then install the other oil
2
seal.
3. Install the original reverse gear shims 6
G
b
8
7
6
Bearing inner race attachment 8:
TIP:
Face the identification mark d on the ball
bearing toward the reverse gear.
3
4. Install the reverse gear assembly.
5
c
Bearing outer race attachment 9:
5. Install new O-rings 0 and A.
Propeller shaft housing
and a new ball bearing 7.
G
90890-06640
90890-06628
d
8
9
8-10