Removing The Power Unit (Tiller Handle Model) - SELVA MARINE Kingfish 25 Service Manual

Q
Removing the power unit (tiller
handle model)
1. Remove the grommet holders 1 and 2,
and then remove the rigging grommet 3
and grommet 4.
4
1
È Electric starter model
É Manual starter model
2. Disconnect the throttle cables 5.
5
Q
P
R
É 3
È 3
2
Power unit assembly
3. Disconnect the start-in-gear protection
cable. See step 1 in "Removing the man-
ual starter" (7-7).
4. Disconnect the battery cables, battery
lead, and battery lead connector. (Elec-
tric starter model) See steps 5 and 6 in
"Removing the power unit (remote con-
trol model)" (7-14).
5. Disconnect the PTT motor leads. (PTT
model) See steps 7 and 8 in "Removing
the power unit (remote control model)"
(7-14).
6. Disconnect the engine start button con-
nectors a. (Electric starter model)
7. Disconnect the alert indicator coupler b.
8. Disconnect the engine shut-off switch
connector c.
9. Disconnect the engine shut-off switch
ground lead d.
c
10. Disconnect the PTT switch coupler. (PTT
model) See step 10 in "Removing the
power unit (remote control model)" (7-
14).
a
b
7
d
7-16