Removing The Upper Case; Installing The Upper Case - SELVA MARINE Kingfish 25 Service Manual

BRKT

Removing the upper case

1. Drain the remaining engine oil.
2. Disconnect the ground lead 1.
1
3. Remove lower mount housing 2 2.
4. Remove the self-locking nuts 3 and
washers 4, and then remove the upper
case assembly 5.
4
3
4
2
5. Remove the bolts 6, upper mount 7,
plate 8, and bolts 9.
9-17
Bracket unit
5
6
7
6. Remove lower mount housing 1 0, and
then remove the lower mount covers A,
lower mounts B, rubber washers C,
washers D, bolts E, and caps F.
B
0

Installing the upper case

1. Install the plate 1 and bolts 2 to the
upper mount 3, and then install the
upper mount assembly.
2. Tighten the bolts 4 to the specified
torque.
9
9
8
F
E
D
C
A