SELVA MARINE Kingfish 25 Service Manual page 167

POWR
e
K
K
14. Connect the battery cables L and bat-
tery lead f, and then fasten the negative
battery cable and ground leads using the
holder M.
g
L
TIP:
Install the terminals of the battery lead f and
wiring harness lead g using the same bolt.
(PTT model)
15. Fasten the extension wiring harness h
using the holders N, and then connect
the 10-pin main wiring harness coupler
k.
16. Fasten the 10-pin main wiring harness
coupler k using the holders O.
7-19
Power unit
f
J
17. Connect the shift cable P, throttle cable
Q, and shift link rod R, and then install
the clips S.
L
S
M
TIP:
To adjust the shift cable and throttle cable,
see "Installing the shift cable and throttle
cable (remote control model)" (3-13).
18. Install the grommet T and rigging grom-
met U, and then install the grommet
holder V.
O k
O
N
R
U
T
h
N
S
P
Q
S
V