SELVA MARINE Kingfish 25 Service Manual page 214

Crankcase bolt D 1–6 (M8):
1st: 15 N·m (1.5 kgf·m, 11.1 ft·lb)
2nd: 30 N·m (3.0 kgf·m, 22.1 ft·lb)
Crankcase bolt E 7–B (M6):
1st: 6 N·m (0.6 kgf·m, 4.4 ft·lb)
2nd: 12 N·m (1.2 kgf·m, 8.9 ft·lb)
TIP:
Make sure that the
smoothly.
13. Install the balancer piston F, and then
tighten the nut G to the specified torque.
F
E
G
TIP:
Position the balancer piston F at bottom
dead center.
Balancer piston nut G:
157 N·m (15.7 kgf·m, 115.8 ft·lb)
14. Install a new gasket H and crankcase
cover I, and then tighten the bolts J to
the specified torque in the order 1, 2,
and so on.
H
I
J
crankshaft turns
E
8
3
J
5
Crankcase cover bolt J:
12 N·m (1.2 kgf·m, 8.9 ft·lb)
Cylinder block
1 6
4
2 7
7
7-66