Installing The Starter Motor; Charging Unit And Components; Checking The Lighting Coil - SELVA MARINE Kingfish 25 Service Manual

ELEC
A
8. Install the bracket B.
9. Install the magnet switch C and cap g.
g

Installing the starter motor

1. Install the starter motor to the power unit.
See "Starter motor" (7-32).
5-27
Electrical system
f e
4
B
LT
242
C

Charging unit and components

Checking the lighting coil

1. Remove the
"Removing the manual starter" (7-7).
(Manual starter model)
Remove the flywheel magnet cover.
(Electric starter model)
2. Disconnect the lighting coil coupler a,
and then connect the special service tool
1.
3. Measure the lighting coil output peak
voltage.
a
G
G
R
a 1
Test harness (2 pins) 1: 90890-06887
Lighting coil output peak voltage:
Green (G)–Green (G)
r/min
Cranking
DC V 11.5
manual starter. See
1
b
B
b
Unloaded
1500 3500
25.7 61.6