Removing The Propeller Shaft Housing Assembly; Disassembling The Propeller Shaft Assembly; Disassembling The Propeller Shaft Housing Assembly - SELVA MARINE Wahoo 15 Service Manual

LOWR
Removing the propeller shaft
housing assembly
1. Remove the bolts from the propeller shaft
housing.
2. Remove the propeller shaft housing 1,
and then remove the propeller shaft 2.
5
Stopper guide plate 3: 90890-06501
Center bolt 4: 90890-06504
Bearing housing puller claw S 5:
90890-06564
Disassembling the propeller shaft
assembly
1. Remove the shift plunger 1 from the
propeller shaft.
2. Remove the cross pin ring 2, and then
remove the cross pin 3 and dog clutch
4.
3. Pull out the spring 5 from the propeller
shaft.
2
4
1
3
6-7
Lower unit
4
2
3
1
S6AG6080
5
S6AG6090
Disassembling the propeller shaft
housing assembly
6
1. Remove the reverse gear and shim(s).
2. Remove the ball bearing.
4
6
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Stopper guide plate 1: 90890-06501
Center bolt 2: 90890-06504
Bearing puller assembly 3:
90890-06535
Stopper guide stand 4:
90890-06538
3. Remove the oil seals and the needle
bearing.
6
S6AG6100
2
1
3
S6AG6110
6AG3J11