POWR
10. Disconnect the PTT switch coupler h.
(PTT model)
11. Remove the shift link bolts G.
12. Remove the holder H from the bracket
I, and then disconnect the cooing water
hose J from the exhaust cover.
J
13. Slide the clamp K down, and then dis-
connect the fuel hose L.
7-15
Power unit
g
h
G
I
H
L
14. Remove the oil dipstick M, apron N, and
driven sprocket cover O.
M
15. Install the shackle P onto the engine
hanger on the cylinder head.
16. Hook the lifting harness Q onto the
shackle and engine hanger on the crank-
case, and then suspend the power unit
R.
17. Remove the power unit R.
K
O
N