Removing The Power Unit - SELVA MARINE Blue Whale 250 EFI Service Manual

POWR
7. Disconnect the quick connectors 8 and
remove the high-pressure fuel hose
assembly (vapor separator-to-starboard
fuel rail).
8
NOTE:
• Be sure to reduce the fuel pressure before
removing the quick connector. To reduce
the fuel pressure, see Chapter 4, "Reduc-
ing the fuel pressure."
• To disconnect the quick connector, see
Chapter 4, "Disconnecting the quick con-
nector."
8. Remove the plastic ties 9 and clips 0,
and then pull up the wiring harness.
0
9. Remove the bolts and wiring harness
guide A.
A
5-21
Power unit
8
S6P25410
0
9
0
9
S6P25420
S6P25135E

Removing the power unit

NOTE:
It is recommended to loosen the flywheel
magnet nut before removing the power unit to
improve working efficiency.
1. Remove the flywheel magnet cover.
2. Remove the retaining plate 1, grommet
2, and cable holder 3, and then discon-
nect the remote control cables.
3. Remove the starboard intake manifold.
NOTE:
See the exploded diagram (4-12).
4. Remove the clamps 4 and caps 5, and
then disconnect the PTT motor lead 6.
5
6
5. Disconnect the vapor gas hose 7 from
the starboard top cowling lock.
4
S6P25300
6P23H11