Removing The Power Unit - SELVA MARINE Grey Whale 200 EFI Service Manual

POWR

Removing the power unit

NOTE:
• Be sure to reduce the fuel pressure before
removing the power unit. To reduce the fuel
pressure, see Chapter 4, "Reducing the
fuel pressure."
• It is recommended to loosen the flywheel
magnet nut before removing the power unit
to improve working efficiency.
1. Remove the flywheel magnet cover.
2. Remove the retaining plate 1, grommet
2, and cable holder 3, and then discon-
nect the remote control cables.
3. Remove the starboard intake manifold.
NOTE:
See the exploded diagram (4-9).
4. Remove the clamps 4 and caps 5, and
then disconnect the PTT motor lead 6.
STBD
5
6
5. Disconnect the vapor gas hose 7 from
the starboard top cowling lock.
5-39
Power unit
4
S6AL5G80
STBD
6. Disconnect the cooling water pilot hose
8.
7. Remove the neutral switch coupler (blue)
9 from the bracket, and disconnect the
neutral switch coupler and shift cut
switch coupler (black) 0.
8. Remove the oil dipstick A and dipstick
guide B.
A
0
STBD
9. Disconnect the battery cables.
NOTE:
See the exploded diagram (5-35).
10. Disconnect the fuel hose from the fuel fil-
ter.
7
S6AL5G90
B
9
8
S6AL5H00
6AL3J11