System; Log; System Log - NetComm NTC-6200 Series User Manual

System

Log

The Log pages are used to display or download the System log, IPSec log and Event notification logs on the router.

System log

The System Log enables you to troubleshoot any issues you may be experiencing with your NTC-6200 Series router. To access the
System Log page, click on the System menu. The System Log is displayed.
Log file
The Log capture level drop down list lets you select the level of logs that are written to the log file. Set the level that you would like to
capture first, then set the Display level since the Display level chosen filters only the messages that are captured.
To download the System log for offline viewing, right-click the Download button and choose Save as.. to save the file. To clear the
System log, click the Clear button. The downloaded log file is in Linux text format with carriage return (CR) only at the end of a line,
therefore in order to be displayed correctly with new lines shown, it is recommended to use a text file viewer which displays this
format correctly (e.g. Notepad++).
Log data is stored in RAM and therefore, when the unit loses power or is rebooted, it will lose any log information stored in RAM. To
ensure that log information is accessible between reboots of the router there are two options:
1. Enable the Log to non-volatile memory option
2. Use a remote syslog server
www.netcommwireless.com
Figure 108 - System log file
NetComm Wireless 3G M2M Router / Plus
105