Snmp Agent; Tr-069 Client - NetComm NF10W User Manual

SNMP Agent

The Simple Network Management Protocol (SNMP) allows a network administrator to monitor a network by retrieving settings on
remote network devices. To do this, the administrator typically runs an SNMP management station program such as MIB browser
on a local host to obtain information from the SNMP agent, in this case the NF1ADV (if SNMP is enabled). An SNMP 'community'
performs the function of authenticating SNMP traffic. A 'community name' acts as a password that is typically shared among SNMP
agents and managers.

TR-069 Client

TR-069 enables provisioning, auto-configuration or diagnostics to be automatically performed on your router if supported by your
Internet Service Provider (ISP).
FIELD
Inform
Inform interval
ACS URL
ACS User Name
ACS Password
WAN Interface used by TR-069
Client
www.netcommwireless.com
v1.1
Set to enable to activate TR-069 client settings.
Time in seconds that data is sent to the Auto-Configuration Server (ACS).
The address where the ACS server is located.
The user name to access the ACS server.
The password to access the ACS server.
The connection used to send and receive data to the ACS server.
DESCRIPTION
NetComm Wireless NF10W User Guide
60