Event Notification; Notification Configuration - NetComm NTC-220 User Manual

Event notification

The event notification feature is an advanced remote monitoring tool providing you with the ability to send alerts
via SMS, e-mail, TCP or UDP when pre-defined system events occur.

Notification configuration

The Notification configuration screen is used to select the event types, methods of notification and the
destinations for the notifications. Up to four types of alerts for a particular event may be sent to a single destination
profile containing the contact details.
To access the Event notification configuration page, click the Services menu item, select the Event configuration
menu item on the left, then select the Notification configuration menu item.
I T E M
Enable event
notification
Maximum event buffer
size
Maximum retry count
Event notification log
file
Unit ID
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 121 – Event notification options
Toggles the event notification feature on and off.
Specifies the buffer size for event notifications which failed to be
delivered or are yet to be sent. The minimum size is 100 and the
maximum is 10000.
Specifies the maximum number of attempts that the router will
make to deliver an event notification. The range is between 1 and
20.
Specifies to the location and name of the file used to log the event
notification activity.
The Unit ID field is used to specify an identifier for the router which
are sent in the event notifications so that you know which router
has an event.
Table 32 – Event notification configuration options
D E S C R I P T I O N
115 of 193
© NetComm Wireless 2019