Application Installer - NetComm NTC-220 User Manual

Application Installer

The Application installer is designed to upload and install main firmware images, upload recovery firmware images,
custom applications and HTTPS certificates. Use the Browse button to select a file to be uploaded to the router.
When it has been selected, press the Upload button. The file is sent to the router and when the transfer is
complete, the file appears in the Uploaded files list. From the Uploaded files list, you are able to either Install or
Delete a file.
Important – The Application Installer page may exhibit incorrect behaviour on Google Chrome™ and Mozilla Firefox when the web
interface was previously rendered via HTTPS and has switched to HTTP. This is usually the case when you have rebooted from the Main
image into Recovery mode. To work around this issue, clear the router cookies and refresh the page.
Settings
The settings page provides the option of restoring the router to factory default settings. Click the Restore button
to set the router back to the original factory settings.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 164 – Recovery mode – Application Installer
Figure 165 – Recovery mode – Settings
175 of 193
© NetComm Wireless 2019