Gre Tunnelling - NetComm NTC-220 User Manual

GRE tunnelling

The Generic Route Encapsulation (GRE) protocol creates a point-to-point connection similar to a VPN between
clients and servers or between clients only. GRE is used to encapsulate the data or payload.
Configuring GRE tunnelling
To configure GRE tunnelling:
1 From the menu bar at the top of the screen, click Networking and then from the VPN section on the left side
of the screen, click GRE tunnelling. The GRE client list is displayed.
2 Click the +Add button to begin configuring a new GRE tunnelling client profile. The GRE client edit screen is
displayed.
3 Click the Enable VPN toggle key to switch it to the ON position.
4 In the Profile name, enter a profile name for the tunnel. This may be anything you like and is used to identify
the tunnel on the router.
5 In the GRE server address field, enter the IP address or domain name of the GRE server.
NTC-220 – User Guide
UG01028 v1.2 March 2019
Figure 86 – GRE client list
Figure 87 – GRE client edit
81 of 193
© NetComm Wireless 2019