Download The Tar.gz File Or G700 Files To Your Tftp Directory - Avaya G700 Installation And Upgrades

4 Configuring a New G700 with an S8700 (No Local Survivable Processor):
10. Enable the TFTP server as follows:
For NT and Windows 2000 or higher operating systems, set the following:
a . Click on System from menu bar and select setup.
The server option window appears.
- Select the Outbound tab, and enter the outbound file path to C:\tftp - Enter this or your
alternate tftp location in the Outbound tab.
- Under Options tab, enter 69 in the Use Port field (default).
- Select No Incoming (default). However, if you wish to copy files as a backup prior to
performing an upgrade of software, leave this field unchecked.
- Select the Inbound tab, and enter the inbound file path to C:\tftp or your alternate tftp location
in the Inbound tab.
- Click OK.
End
Download the tar.gz File or G700 Files to Your
TFTP Directory
Note: Your laptop (or the customer's PC) must have WinZip or other file zipping
software for this procedure.
Download the tar.gz File from CD-ROM to Your TFTP Directory and Unzip It
Begin
Insert the G700 software CD into your laptop or PC CD-ROM drive.
1.
Use Windows File Explorer or another file management program to access the files on the CD-
2.
ROM drive.
3. Copy the tar.gz file (G700-11.2-0210.1.tar.gz or similar identifier) to the C:\tftp directory.
Use winZIP or another zipfile tool to unzip the file. You may need to unzip an additional tar.gz file
4.
embedded in the original file. You should continue to unzip tar.gz files until you see listed files
with extensions as shown in
All file types for the components of the G700 are unpacked and listed.
End
Installation and Upgrades for the G700 with an S8300/S8700
555-234-100 — Issue 2 — October 2002
"Firmware File Formats" on page 148.
147