Chapter 3
Configuration File Commands
copy mobility-running tftp
User level: privileged, supervisor.
Use the copy mobility-running tftp command to upload the mobility running
configuration from the current NVRAM configuration to a Trivial File Transfer Protocol
(TFTP) server.
Syntax:
The syntax for this command is:
copy mobility-running tftp <filename> <ip_address>
Syntax
<filename>
<ip_address>
Example:
W310-1# copy mobility-running tftp c:\mobility01.cfg
149.49.66.17
Beginning upload operation ...
This operation may take a few minutes...
Please refrain from any other operation during this time.
For more information, use 'show upload status' command.
copy mobility-startup tftp
User level: privileged, supervisor.
Use the copy mobility-startup tftp command to upload the mobility startup
configuration from the current NVRAM configuration to a TFTP sever.
14
Description
The destination file name (full path)
The IP address of the TFTP server
Avaya W310 Command Reference Guide