Remote Command Reference
ABORt Subsystem
ABORt Subsystem
Abort
:ABORt
Restarts any sweep or measurement in progress and resets the sweep or trigger
system. A measurement refers to any of the measurements found in the
menu. SCPI commands associated with these measurements are located in Volume
2.
If : INITiate:CONTinuous is off (single measure), then
: INITiate:IMMediate will start a new single measurement.
If : INITiate:CONTinuous is on (continuous measure), a new continuous
measurement begins immediately.
The INITiate and TRIGger subsystems contain additional related commands.
Front Panel
Access:
Restart
240
for continuous measurement mode
MEASURE
Chapter 5