Agilent Technologies ESA Series User's/Programmer's Reference page 161

Accesses the
Color Palette
with analyzers having a color display.
Key Access:
Default
Vision Impair 1
and
Vision Impair 2
Optical Filter
Monochrome
Accesses the
Diagnostics
Key Access:
Front Panel
Test
Resets the "persistent" state variables to their defaults. These are
Restore Sys
values, such as the GPIB address, that are unaffected by a power cycle
Defaults
or a preset (when
Key Access:
Chapter 2
menu keys. These keys are only available
Color Palette
,
System More
Sets all the display screen attributes to the factory
defined colors.
Key Access:
System
The special colors built into the
keys accommodate most color-deficient
Vision Impair 2
vision problems.
Key Access:
System
Accommodates the use of protective goggles while
viewing lasers.
Key Access:
System
Sets the display screen to green monochrome. The
monochrome display uses different shades of green for
each green value. This is especially useful for driving
external monochrome monitors.
Key Access:
System
menu key.
Front Panel Test
,
System More
Allows you to verify the functionality of each
front-panel key (except
each key name increments once each time the key is
pressed. Rotating the knobs causes the number of
pulses to be counted. Press
Key Access:
System
is set to
Preset Type
,
System More
Front-Panel Key Reference
, ,
More Color Palette
Vision Impair 1
, ,
More Color Palette
, ,
More Color Palette
, ,
More Color Palette
). The number next to
Preset
to exit.
ESC
, ,
More Diagnostics
.)
Factory
System (Local)
and
161