Agilent Technologies ESA Series User's/Programmer's Reference page 121

Accesses the following
Peak Table
Key Access:
Peak Table
On Off
Peak Sort
Freq Amptd
Peak Readout
Chapter 2
Criteria
menu keys:
Peak Table
,
Peak Search More 1 of 2
Displays a list of up to ten signal peaks that is updated
at the end of each sweep. The peaks can be sorted in
order by descending amplitude or by ascending
frequency. Peaks above or below the display line can be
excluded from the table. The peak table function works
with trace 1 only.
Key Access:
Search
Switches the peak table sorting routine between listing
the peaks in order by descending amplitude or by
ascending frequency.
Key Access:
Search
Accesses the following
Key Access:
Search
Normal
Shows up to ten signal peaks.
Key Access:
Search
> Display Line
Shows only peaks above the display line.
Key Access:
Search
< Display Line
Shows only peaks below the display line.
Key Access:
Search
Front-Panel Key Reference
,
Peak Search Type
, ,
More Peak Table
, ,
More Peak Table
menu keys:
Peak Readout
, ,
More Peak Table
, , ,
More Peak Table Peak Readout
, , ,
More Peak Table Peak Readout
, , ,
More Peak Table Peak Readout
Peak Search
121