Service Request Enable - Agilent Technologies ESA Series User's/Programmer's Reference

Service Request Enable

*SRE <integer>
*SRE?
This command sets the value of the service request enable register.
The query returns the value of the register.
Range: Integer, 0 to 255
Read Status Byte Query
*STB?
Returns the value of the status byte register without erasing its contents.
Remarks: See *CLS
Trigger
*TRG
This command triggers the instrument. Use the
: TRIGger:SEQuence:SOURce command to select the trigger source.
Remarks: See also the : INITiate:IMMediate command
Self Test Query
*TST?
This query is used by some instruments for a self test.
For Agilent ESA analyzers, *TST? always returns 0; no tests are performed.
Front Panel
Access:
System, Alignments, Align All Now
Wait-to-Continue
*WAI
This command causes the instrument to wait until all pending commands are
completed before executing any additional commands. There is no query form to
the command.
Chapter 5
Remote Command Reference
IEEE Common Commands
239